Product name: Double parallel self-adhesive Mylar wire

Model: 2UEW 180/PISB 2P

1, characteristics: Also known as Myra wire, coated with a layer of film on the surface of the varnished stranded wire, in addition to meet the electrical properties, thermal properties, chemical properties, mechanical properties, but also greatly improve the insulation performance of the product. Different overlap rates are available (according to customer requirements). High insulation performance, high voltage resistance; Good heat resistance; The soldering temperature is low (soldering temperature 420-460℃) and the multi-strand solder residue is less; The maximum diameter can reach 6.0mm, and the maximum cross-sectional area can reach 28m㎡; The multi-strand wire has good wrapping property, and the softness can be adjusted according to customer requirements.

2, specification range: single line diameter: 0.05mm - 0.80mm;

Temperature class: 130℃, 155℃, 180℃, 220℃;

Number of shares: 2-6000 shares;

Film material: PET, PEN, PTFE, PI, PISB, PETSB and other types;

Membrane coverage: 5%-95%.

3, Mylar classification:

(1) Mylar wire: one or more layers of Mylar film wire are coated on the surface of the varnished stranded wire.

(2) Mylar square line: By multiple strands of stranded wire wrapped tape and then pressed square shape, overlap ratio can be adjusted according to product requirements. At present, the outer diameter range of our pressure square wire (diameter of round wire after coating) : 1.5mm-- 12mm

(3) Multi-parallel Mylar wire: By multi-stranded wire, silk-covered wire parallel coating, overlap ratio can be adjusted according to product requirements. At present, the number of shares in our company: 2 strands -----4 strands of double packs, multiple Mela wire coating, single strand (twisted wire, silk-covered wire) Outer diameter range: 1.2mm----6.50mm(4)PA nylon hot air self-adhesive wire: Multiple strands of varnished stranded wire, silk-covered wire and Mylar wire are coated with PA nylon hot-air self-adhesive coating of more than 0.035mm (single side thickness) (the minimum coating thickness of 0.035mm single side, the maximum coating thickness can be based on product requirements); Twisted wire outer diameter production range: 0.30mm----12.00mm can be produced.

4, implementation standards: JIS, GB or customer standards.

5, Application: can be used as wire insulation sheath to wind high frequency inductors and transformers, etc., used in converters, communication equipment, ultrasonic equipment, sonar equipment, video equipment, radio equipment and inductors and car wire, charging pile, electromagnetic device equipment.